POTENTIAL DELAYS: Due to industry-wide supply shortages, we are experiencing additional delays of up to six-weeks in the production of certain custom vanity top configurations. Please contact our customer service department at 888-715-3007 (EXT 4 for vanities) with questions. We appreciate your patience during this time.
Choose your color
Our vanity tops are available in a multitude of color options and styles to fit whatever look your going for in your space. Choose from top brands like Corian and LX Hi-Macs and get the modern look you're after with hygenic, impermeable surface quality.
Choose your size
Vanity top widths come in standard vanity sizes up to 144". Custom widths may be purchased by ordering the next larger size and choosing the correct width. Vanity top depths typically measure 22” from front to rear, although custom depths may also be ordered.
About overhang: If you are replacing the vanity top, the correct measurements may already include the overhang. If all that is there now is the cabinet, then add 3/4" to 1" for the edges that are not against the wall. This amount should be included in the width and depth when ordering.
Edge and Backsplash Options
Tops come with a 4” backsplash that is attached to the wall and vanity top by the purchaser. 4” left or right side splashes are available. Coved backsplash and side splashes are also available options.
Tops have a 1.5” thick edge and a choice of edge profiles.
Choose your sink
Visit the Sink Options Detail page for more information and specifications for the sinks offered in the vanity top program.
Vanity tops come with 3 sink options: no sinks or holes, undermount solid surface or undermount porcelain sink.
Solid surface sinks are available in oval and rectangular shapes and are both attached under the vanity top in what is called an integrated undermount fashion so that the top flows seamlessly into the bowl.
The porcelain sinks are oval and mounted under the vanity top. The edge of the vanity top overhangs the sink opening about ¼”.
Sink Edge Thickness: Increase the thickness of the countertop around the edge of the sink opening to one inch which gives the top a thicker appearance. Learn more about sink build-up options.
Faucet Hole Options
Faucet hole configurations are optional and include a single, centered 1-3/8” hole, three 1-3/8” holes where the centers of the 2 outer holes are 4" apart (4 inch on center), and three 1-3/8” holes where the centers of the 2 outer holes are 8" apart (8 inch on center).
Installation Information
The top can be set directly on the vanity cabinet since 1“ thick buildup spacing strips are shipped in place under the top (see images below). The strips provide support for sides with no finished edge and elevate the top so the edge drop of 1” does not interfere with drawers opening. The buildup strips rest on the top edge of the cabinets.
For more information, check out our Vanity Top Installation Guide